As an Amazon Associate I earn from qualifying purchases.1. Sport Direct
Sport Direct™ Bicycle Mega Bright 3 LED's Light Set
Sport Direct - Failure to have the correct lights or reflectors can result in being issued a Fixed Penalty Notice where the maximum is £30 or you can be subject to a maximum fine of £1000 in the courts. And since bs6102/3 does not cater for flashing, approval is granted simply on the basis of the brightness of the Light and the number of flashes per minute.
All mounting bracket and a Rucksack Clip Are Included, CE Approved.
3 diode rear with 3 functions. Conforms to rvlrroad vehicle lighting regulations it is now legal to have a flashing light on a pedal cycle, provided it flashes between 60 and 240 times per minute and it emits at least 4 candela.
1 front mega white 3 diode led front lamp, rear led mega bright, visiblity upto 600 metres, Includes 4 x AAA High Power Batteries for front and 2 x AAA High Power for rear lamp. N. B. It is illegal to cycle on a public road after dark without lights and reflectors. These lights have constantrun time 36hrs, ChasingRun Time 220hrs and flashingRun Time 110hrs mode.
2. KATUR
KATUR 12V LED Motorcycle Fender Rear Tail Stop Light Reflector Universal for MX Motocross Sport Pit Dirt Bike Red Shell
KATUR - Multi-function. Some minor modifications maybe needed during installation. Three fixing points with central hole for easy cleaning. A small number plate holder for off-road bikes with LED brake light.
Very low energy consumption so that the engine power is not reduced. It is not specific designed for any bike. Integrated with tail light and license plate holder. Yellow wire for running light; Red wire for - Brake Light; Black wire for Ground.
Waterproof electronic board fitted with a stabilized circuit and designed to dampen sudden voltage jumps; Operating range from 12 Volts. Lightweight & universal LED taillight mounts under the rear fender of virtually every off-road motorcycle. Universal fit: most of motorcycle models, Dirt Bike, or any Custom Bikes.
| Brand | KATUR |
| Manufacturer | KaTur |
| Part Number | AMMP-1811-RedShell |
| Warranty | 1 Year Warranty |
3. KATUR
KATUR Rear Fender LED Brake Red Tail Light Lamp with Bracket for Off-road Motorcycle Motocross Dirt Bike Red Lens
KATUR - It is not specific designed for any bike. Very low energy consumption so that the engine power is not reduced. Waterproof electronic board fitted with a stabilized circuit and designed to dampen sudden voltage jumps; Operating range from 12 to 15 Volts.
Three fixing points with central hole for easy cleaning. A small number plate holder for off-road bikes with LED brake light.
Universal fit: most of motorcycle models, Dirt Bike, or any Custom Bikes. Lightweight & universal LED taillight mounts under the rear fender of virtually every off-road motorcycle. Some minor modifications maybe needed during installation.
| Brand | KATUR |
| Manufacturer | KATUR |
| Height | 9.6 cm (3.78 Inches) |
| Length | 32 cm (12.6 Inches) |
| Width | 9.6 cm (3.78 Inches) |
| Part Number | AMMP-1404-RedLens |
| Model | 10 |
4. CatEye
22-32 mm, Black, CatEye CA475TL6107 TL-LD610 LED Rear Light, Black & H34 Flex Tight Bracket 533-8827N Cycling Lights and Reflectors
CatEye - Product 2: from the morning coffee run to the 24 hour adventure race. Product 1: Fits vertically or horizontally. Product 2: cat eye is the industry leader in light technology.
Product 1: Sleek design. Product 2: Banish the night. Product 1: constant/Flashing/Random/Side to side modes. Product 1: belt clip and rear rack mount options.
5. Kungfu Mall
Kungfu Mall 2 Set M12x1.5 Rear Brake Light Switch Spring Kit for Universal Motorcycle Quad Pit Dirt Bike,2 PCS Spring
Kungfu Mall - Drum brake switch spring kit is easy replacement, simple and universal for most drum brake systems. 2 sets:2 pcs m12*1. 5 rear brake light Switch, 2 PCS Spring. Fitment:suitable for cars, dirt bikes, motorcycles, from Classic Bikes to Super Bikes, pit bikes to quad bikes / ATVs, Monkey Bikes, Scooters and more.
Supplied with a 175mm spring that can be cut down to size, a direct replacement for most brake pedal switches. Size:cable length: 330mm approx, Spring Length: 155mm.
6. Keenso
LED Motorcycle Tail Light, Scooter, ATV, Dirt Bike, Universal 12V 15 LED Motorcycle Tail Brake Light Rear Stop Lamp Running Taillight Red for Motorcycles
Keenso - Premium quality: adopt high quality abs plastic material and advanced ultrasonic welding technology, this 12V motorcycle LED tail light is shockproof and waterproof, can use in any weather conditions. Easy installation: easy installation, no need change the lines.
97g. Not easy to aging and abrasion resistant. High brightness & long life span: the motorcycle brake tail light adopts high brightness 15 LED beads, and its life service time is up to 50, which has strong signals and stable performance, 000 hours.
And it is energy saving, this 12V LED motorcycle tail lights always bright on running, has high efficient warning function and low power consumption. Rational compact construction, just directly replace the old or worn one, lightweight and durable, can withstand destructive tests from 2 meters high.
Product specifications: material: abs plastic; lampshade color: smoke, white optional; led beads: 15 led; led light: red; rated voltage: 12v dc; working voltage: 10-15V DC; current: 009a; color temperature: 3000k; lifespan: 50, red, 000 hours; sizeL * H * W: approx. 116 * 33 * 35mm/4. 6" * 1. 3" * 1. 4"; package weight: approx. 3 in 1 design: integrated with running light and brake light, high bright on stop brake.
| Brand | Keenso |
| Manufacturer | Keenso |
| Height | 3.5 cm (1.38 Inches) |
| Length | 11.6 cm (4.57 Inches) |
| Width | 3.3 cm (1.3 Inches) |
| Part Number | Keensos7kd2yvem8-02 |
7. DREAMIZER
Motorbike Motocross LED Rear Brake Light with Bracket for Off-road SMR 690 CR EXC WRF 250 450 125SX XR DRZ KLX KMX WR125, DREAMIZER Motorcycle Dirt Bike Fender Tail Light
DREAMIZER - 3 wires connection: green=ground, brown=Running Light, Yellow=Brake Light. Cable Length:14. 56"/37cm. This light weight, universal rear LED Mounts under The Rear Fender of Almost all Off-Road Motorcycles.
Easy to install and clean, Three Fixing Points with Central Hole for Easy Cleaning. Material: high quality abs plastic, thread size:4mm.
Number of the leds: 8 leds. It is not specific Designed for Any Bike. Universal fit: most of motorcycle models, dirt bike, or Any Custom Bikes. Working voltage: dc 12v, very Low Energy Consumption so that The Engine Power is Not Reduced. Some minor modifications Maybe Needed during Installation.
8. Lovemotor
Motorcycle Chrome Skull Turn Signal Brake Rear Tail Lights For Dual Sport bike
Lovemotor - Adjustable mounting slot spacing: 5. 5cm2. 16" min. Condition: Brand new without instruction. Screw hole Diameter: 6MM. 15cm5. 9" max. Fitment:the tail light complete set choppers, cruisers or classic motorcycle.
9. RUTU
2 Wires Brake Switch Universal Brake Lamp Light Switch Rear Foot Replacement for ATV Dirt Bike Moped
RUTU - Quality assurance: rutu offer 12-month warranty for any quality related issues. Aftermarket replacement Parts High Performance. 2 wires brake switch universal brake Lamp Light Switch Rear Foot ATV Dirt Bike Moped. Please feel free to contact us if any problems.
| Brand | RUTU |
| Manufacturer | RUTU |
| Part Number | RUTUJR2-025X2 |
10. KATUR
KATUR Motorcycle Rear Fender LED Brake Red Tail Light Lamp with Turn Signal Indicator Blinker Lights for Off-road Motorbike Motocross Dirt Bike Red Lens
KATUR - Very low energy consumption so that the engine power is not reduced. Universal fit: most of motorcycle models, Dirt Bike, or any Custom Bikes.
A small number plate holder for off-road bikes with LED brake light. Three fixing points with central hole for easy cleaning. Waterproof electronic board fitted with a stabilized circuit and designed to dampen sudden voltage jumps; Operating range from 12 to 15 Volts.
Side with led turn Signal Indicator Blinker lights. Lightweight & universal LED taillight mounts under the rear fender of virtually every off-road motorcycle. Some minor modifications maybe needed during installation. It is not specific designed for any bike.
| Brand | KATUR |
| Manufacturer | KaTur |
| Part Number | AMMP-1469 |
| Model | AMMP-1469 |
| Warranty | 1 Year Warranty |
Sport Direct - Failure to have the correct lights or reflectors can result in being issued a Fixed Penalty Notice where the maximum is £30 or you can be subject to a maximum fine of £1000 in the courts. And since bs6102/3 does not cater for flashing, approval is granted simply on the basis of the brightness of the Light and the number of flashes per minute.
KATUR - Multi-function. Some minor modifications maybe needed during installation. Three fixing points with central hole for easy cleaning. A small number plate holder for off-road bikes with LED brake light.
KATUR - It is not specific designed for any bike. Very low energy consumption so that the engine power is not reduced. Waterproof electronic board fitted with a stabilized circuit and designed to dampen sudden voltage jumps; Operating range from 12 to 15 Volts.
CatEye - Product 2: from the morning coffee run to the 24 hour adventure race. Product 1: Fits vertically or horizontally. Product 2: cat eye is the industry leader in light technology. Product 1: Sleek design. Product 2: Banish the night. Product 1: constant/Flashing/Random/Side to side modes. Product 1: belt clip and rear rack mount options.
Kungfu Mall - Drum brake switch spring kit is easy replacement, simple and universal for most drum brake systems. 2 sets:2 pcs m12*1. 5 rear brake light Switch, 2 PCS Spring. Fitment:suitable for cars, dirt bikes, motorcycles, from Classic Bikes to Super Bikes, pit bikes to quad bikes / ATVs, Monkey Bikes, Scooters and more. Supplied with a 175mm spring that can be cut down to size, a direct replacement for most brake pedal switches. Size:cable length: 330mm approx, Spring Length: 155mm.
Keenso - Premium quality: adopt high quality abs plastic material and advanced ultrasonic welding technology, this 12V motorcycle LED tail light is shockproof and waterproof, can use in any weather conditions. Easy installation: easy installation, no need change the lines.
DREAMIZER - 3 wires connection: green=ground, brown=Running Light, Yellow=Brake Light. Cable Length:14. 56"/37cm. This light weight, universal rear LED Mounts under The Rear Fender of Almost all Off-Road Motorcycles.
Lovemotor - Adjustable mounting slot spacing: 5. 5cm2. 16" min. Condition: Brand new without instruction. Screw hole Diameter: 6MM. 15cm5. 9" max. Fitment:the tail light complete set choppers, cruisers or classic motorcycle.
RUTU - Quality assurance: rutu offer 12-month warranty for any quality related issues. Aftermarket replacement Parts High Performance. 2 wires brake switch universal brake Lamp Light Switch Rear Foot ATV Dirt Bike Moped. Please feel free to contact us if any problems.
KATUR - Very low energy consumption so that the engine power is not reduced. Universal fit: most of motorcycle models, Dirt Bike, or any Custom Bikes.
