As an Amazon Associate I earn from qualifying purchases.1. Laser
Laser 5262 Diesel Bleeding/ Primer Kit
Laser - For connection in-line with the vehicles low pressure delivery system. There are a total of six different connection types included in the kit covering Ford | PSA | GM | Fiat | Rover | Land Rover | Renault | Mercedes-Benz.
The clear pipes allow any air bubbles in the system to be seen. For connection in-line with the vehicle's low pressure delivery system. Automotive Tool. Registered Design.
| Brand | Laser |
| Manufacturer | Laser |
| Height | 39.2 cm (15.43 Inches) |
| Length | 4.8 cm (1.89 Inches) |
| Width | 30.8 cm (12.13 Inches) |
| Part Number | LAS5262 |
| Model | 5262 |
| Warranty | 12 Months |
2. robots master
Robots master For 6.2L 6.5L Chevy GMC GM Diesel Turbo Fuel Injector Installation Return Bleed Line Kit 72" 183cm Car Fuel Injectors Accessory
robots master - Placement on Vehicle: Fuel Injector. Item weight: 01kg. Interchange Part Number: install hose return line set. Special features: Fuel Injector Installation Return Line Kit. Feature:.
3. Draper
Draper 43986 Diesel Priming Pump
Draper - Expert Quality. For priming diesel fuel lines, filters and pumps. Hand bulb with one way valve and in-line fuel connectors.
| Brand | Draper |
| Manufacturer | Draper |
| Height | 3.8 cm (1.5 Inches) |
| Length | 38.6 cm (15.2 Inches) |
| Width | 17.2 cm (6.77 Inches) |
| Part Number | 43986 |
| Model | 43986 |
4. Laser
Laser 3463 Diesel Injection Priming Tool
Laser - Suitable for vauxhall 2. 2 di and 2. 0 di diesel engines with engine codes: X20DTL | X20DTH | X22DTH. Pump available separately - Part No. Automotive Tool. Specialist tool. For the introduction of fuel into the fuel pump after replacement of the fuel filter. 10mm diameter connection. 3813.
| Brand | Laser |
| Manufacturer | Tool Connection (EU) |
| Height | 38 cm (14.96 Inches) |
| Length | 4.5 cm (1.77 Inches) |
| Width | 8.3 cm (3.27 Inches) |
| Part Number | LAS3463 |
| Model | 3463 |
5. QLOUNI
Primer Bulb Kit for Car Boat Marine with Bottle Opener Keyring, Manual Diesel Pump for Gas Gasoline Oil Liquid Water, Hand Transfer Fuel Pump with 8mm Primer Fuel Line Hose, QLOUNI Fuel Bulb Assembly
QLOUNI - Superior material made of nbr rubber, the fuel bulb assembly with one-way valve is environmentally friendly, and resistant to aging. It’s perfect for priming a diesel after a change in fuel filter. The primer bulb pump kit is great for bleeding diesel system.
With good quality, it has a long service life. Because of rubber smell, diesel, you can try to use a clear hose to replace rubber pipe. So this auto transfer pump kit has a long service life.
Easy to use the hose is easy to install and does not fall off easily, and manual syphon pump has built-in direct-flowing valve for faster extraction. Wide usage peugeot, ships, helicopters, ships, renault, motorcycles and other fuel systems.
There’s a mark “arrow” on the surface of hand pump. Please keep the arrow down before pumping. Multifunctional transfer pump this manual water pump is not only for carssuch as transferring gas, fuel, but it can also be a water changer for fish tank at you home. A bottle opener as bonus the bottle opener with a ring is made of aluminum alloy, so it’s a good supplement for your key ring.
6. Cocoarm
Hand Held Brake Bleeder Tester Set Bleed Kit Vacuum Pump Car Motorbike Vacuum Pump Bleed Kit, Cocoarm Vacuum Pump
Cocoarm - Application: this self bleed hand held vacuum pump kit used to test a variety of essential vehicle settings and operations. East storage: the vacuum pump kit comes with a carrying case for easy transportation and storage.
Easy operation: the vacuum pump kit is easy to be operated, perfect for brake and fuel line bleeding.
Hoses and adaptors: the vacuum pump kit attaches hoses and adaptors to work with most vehicles to check vacuum and brake systems. Hand held pump: the hand held pump has a smooth action pull trigger for your comfort and you instantly get pressure readings from the easy to read gauge situated at the front of the gun.
7. Laser
Laser 7174 Tools-Pneumatic Diesel Bleeding Kit-7174
Laser - Compatible for use with existing laser fuel system bleed kits See Part Nos. Significant time saving over hand pump systems. 5780 or similar.
5262, 5567, 5704. Job 11935. Snap connector male & female sizes: 9. 89mm, 9. 49mm, 11. 8mm, 7. 89mm. 6mm male spigot for connection to Laser Pneumatic Fluid Extractor & Brake Bleeder Part No.
| Brand | Laser |
| Manufacturer | The Tool Connection |
| Height | 24 cm (9.45 Inches) |
| Length | 4.8 cm (1.89 Inches) |
| Weight | 0.35 |
| Width | 21.1 cm (8.31 Inches) |
| Part Number | 7174 |
| Model | 7174 |
| Warranty | 12 Months from date of purchase |
8. Femor
Adapter and Case, for Automotive Vehicle ,Truck and Motorbike, Brake Bleeding Kit with Vacuum Gauge, FEMOR Hand Held Vacuum Pump Tester
Femor - Pressure gauge up to 76 cm Hg. 1 x drainage container 120 ml with separate lid. With 6 different adaptors for various vehicles. Includes 4 connection tubes. Material of pump: ABS/brass.
| Brand | Femor |
| Manufacturer | Femor |
| Weight | 1.01 |
| Part Number | FIXKIT |
| Model | . |
9. ePathChina®
EPathChina® Hot Fuel Pump Hand Primer Bulb Fuels Used For Cars Ship Boat Marine Diesel Gas Petrol Engine Oil
ePathChina® - Suitable for Carburettor and low pressure fuel systems. Metal valves size: 8mm5/16" body size: 154 x 46 mm / 6. 06 x 1. 81in. 8mm fuel primer pump petrol. 8mm rubber fuel primer Gasoline Petrol Diesel Pump Black. Material: light wieght Alloy and Rubber.
10. Sealey
382mm x 162mm x 60mm, Sealey VS055 Diesel Fuel System Priming Device
Sealey - Length: 60mm. Hose bore: n/a. Height: 382mm. Width: 162mm. Applications: vauxhall/Opel; 2. 0di, 2. 2di.
| Brand | Sealey |
| Manufacturer | Sealey |
| Height | 38.2 cm (15.04 Inches) |
| Length | 6 cm (2.36 Inches) |
| Width | 16.2 cm (6.38 Inches) |
| Part Number | SEAVS055 |
| Model | VS055 |
Laser - For connection in-line with the vehicles low pressure delivery system. There are a total of six different connection types included in the kit covering Ford | PSA | GM | Fiat | Rover | Land Rover | Renault | Mercedes-Benz. The clear pipes allow any air bubbles in the system to be seen. For connection in-line with the vehicle's low pressure delivery system. Automotive Tool. Registered Design.
robots master - Placement on Vehicle: Fuel Injector. Item weight: 01kg. Interchange Part Number: install hose return line set. Special features: Fuel Injector Installation Return Line Kit. Feature:.
QLOUNI - Superior material made of nbr rubber, the fuel bulb assembly with one-way valve is environmentally friendly, and resistant to aging. It’s perfect for priming a diesel after a change in fuel filter. The primer bulb pump kit is great for bleeding diesel system.
Cocoarm - Application: this self bleed hand held vacuum pump kit used to test a variety of essential vehicle settings and operations. East storage: the vacuum pump kit comes with a carrying case for easy transportation and storage.
Laser - Compatible for use with existing laser fuel system bleed kits See Part Nos. Significant time saving over hand pump systems. 5780 or similar. 5262, 5567, 5704. Job 11935. Snap connector male & female sizes: 9. 89mm, 9. 49mm, 11. 8mm, 7. 89mm. 6mm male spigot for connection to Laser Pneumatic Fluid Extractor & Brake Bleeder Part No.
Femor - Pressure gauge up to 76 cm Hg. 1 x drainage container 120 ml with separate lid. With 6 different adaptors for various vehicles. Includes 4 connection tubes. Material of pump: ABS/brass.
ePathChina® - Suitable for Carburettor and low pressure fuel systems. Metal valves size: 8mm5/16" body size: 154 x 46 mm / 6. 06 x 1. 81in. 8mm fuel primer pump petrol. 8mm rubber fuel primer Gasoline Petrol Diesel Pump Black. Material: light wieght Alloy and Rubber.
