As an Amazon Associate I earn from qualifying purchases.
1. HYCHIKA BETTER TOOLS FOR BETTER LIFE
3000IPM Impact Frequency, 4.0Ah Battery, with Socket Set 17/19/21mm for Car Wheel Nut Remove, HYCHIKA 18/20V Impact Gun, Cordless Impact Wrench, 350Nm Electric Wrench Driver, 1/2 Inch ChuckHYCHIKA BETTER TOOLS FOR BETTER LIFE
- Forward/reverse switch and two speed variation is perfect for intelligent regulation. With led lighting, it can provide the best illumination for the working area in the dark. With 4. 0a fast charger, provides stable and huge power and enough run time for your daily work, it only takes one hour to fully charge the power driver.
What you get1 x hychika 18v cordless impact wrench, 1 x 4. 0ah lithium battery, 1 toolbox, 3 x impact sockets 17/19/21 mm, 1x adapter conversion from 13mm to 10mm, 1 x quick charger, 1 user manual.3
3 impact sockets & 10mm adapterthe most common size are 17/19/21 mm, which is very suitable for installing wheels and removing aluminum rims. It also has a high density blow molded case for storage, and a sturdy outer case provides perfect protection for the impact wrench driver.
2000rpm speed & 3000 ipm impact frequency350nm torque max provides strong impact frequency 3000 ipm and 2000rpm speed. Offer more choices for your work. Ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control and comfort. With 350nm torque, it can easily loosen nuts, bolts or large wheel screws. The 13mm chuck fits most screw sizes. 4.
Flexible Cordless Drill for Power DrillDiameter 10mm, High Toughness Rust-proof High Efficiency Drill Nut Driver, High Hardness Easy Operation Hex Shank SleeveWosune
- 100mm total length for easy access to narrow and deep area. With good strength and toughness, easy to operate, long service life. Hex shank allows the sockets to work on power drill, electric screwdriver, cordless drill, etc.
These magnetic sockets attract the removed screws or nuts and prevent them from losing. Blackening surface treatment, not easy to rust.
|Weight||0.46 kg (1.02 Pounds)|
Laser 6064 Air Hammer Driven Impact DriverLaser
- 6031 or similar products. Complete with 4 x 5/16 hex shank bits Sizes: Phillips Ph2/Ph4 and Flat 8mm/10mm. For removing corroded and over tightened fasteners. Impact driver bi-directional designed to be used with an Air Hammer.
With adaptor for the laser air chisel Part No. Manufactured from S45C and Chrome Molybdenum. Complete with side handle to provide turning torque. 1/2"d allows use of 1/2"d impact sockets if required. Bits are considered consumable and available to re-order - Part No: 1495.
|Weight||0.5 kg (1.1 Pounds)|
Makita DTW1002Z 18 V LXT Brushless 1/2In Impact Wrench Bare Unit, Blue, Large, 500 WMakita
- Forward/reverse rotation. Electronic 3-stage impact power selection hard/medium/soft. Sound power level: 108 dBA. Variable speed control by trigger. Ergonomic soft grip. Twin led job light.
|Weight||3.13 kg (6.9 Pounds)|
Maypole 76312 12-inch 19mm Extension SocketMaypole
- Maypole 12" extension socket 19mm 76312. 12" 300mm length. 19mm extended socket for caravan leg winding. Made from a strong and durable steel. Suits 10mm drill chucks.
|Weight||0.25 kg (0.55 Pounds)|
10mm, 9mm, 6mm, 8mm, Channellock MD-7CB 7-Piece Metric Nut Driver Set-5mm, 11mm, 7mmChannellock
- Set includes: 5 mm, 7 mm, 10 mm, 9 mm, 8 mm, 6 mm, 11 mm Code Blue Nutdrivers. High torque, 3-sided Code Blue grips. Nutdrivers with full hollow shafts. Laser etched steel caps for easy identification.
April Gift Drill Nut Driver, Easy Operation Hex Shank Sleeve, High Efficiency High Hardness Wide Application Flexible for Power Drill Cordless Drill10mm in diametMeiyya
- Hex shank allows the sockets to work on power drill, electric screwdriver, cordless drill, etc. With good strength and toughness, easy to operate, long service life.
Blackening surface treatment, not easy to rust. 100mm total length for easy access to narrow and deep area. These magnetic sockets attract the removed screws or nuts and prevent them from losing.
|Weight||0.46 kg (1.02 Pounds)|
Clarke X-Pro CAT131 ½" Twin Hammer Air Impact Wrench 500ft/lbsClarke
- Heavy duty twin impact hammer mechanism, Exhaust under pistol grip handle. Max torque 680nm 500ft-lb, max speed 7000rpm, Max air pressure 6. 2bar 90psi. Variable speed actuation trigger and air regulator power control.
Average no load air consumption 6. 5cfm, air consumption on load 6. 2bar 18cfm. Tough reinforced aluminium housing for increased durability, Requires 10mm bore hose.
Burisch Air Impact Wrench 680nm 500ft-lb Twin Hammer 1/2" Driver Pro SeriesBURISCH
- A great quality 680nm/500ft-lb twin Hammer 1/2" driver with three-position adjustable air/torque control and reversible action. Three tightening torque settings allow optimum control.
We recommend the burisch 10mm ID bore air hose for optimum performance. The ultimate in power for your trade workshop or home garage. Adjustable air/Torque Control and Reversible Action.
|Weight||4 kg (8.82 Pounds)|