As an Amazon Associate I earn from qualifying purchases.1. MeetRade
MeetRade 4PACK Dashboard Mounting Pad Disk With PU Sticky Adhesive Replacement Kit 95mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield GPS Dash Cam
MeetRade - Press down repeatedly to increase the contact of the adhesive with the substrate. 2 pack package include 2 pack of 95mm diameter base disc+2 Pack of 80mm Clear Double sided adhesive+2 Free cleaning Pad. Select a certain place to instal, wait 12 hours after install.
The suction cup can be stably fixed on it and never fall off. Heavy duty transparent double-sided adhesive tape can be used for smooth surfaces such as glass, and leather surface, black TPU disc it can directly used on the dashboard, stainless steel, tile, or some other not smooth surface, etc.
When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.
Never fall again! two kinds materials, so that the suction cup bracket can firmly fixed on it and will never fall. Where to use? when you mount your car phone mount on dashboard, Your sucker is not strong enough and fall off often? Try MeetRade Mounting pad and super adhesive for lock sucker. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Note: please don't touch the adhesive with your finger.
2. ShipeeKin
ShipeeKin Car Suction Cup Dash Cam Mount for Vehicle Video Recorder on Windshield & Dash Board with 13 Joints for Driving Camcorder GPS
ShipeeKin - Attaching to a clean and smooth surface to get maximum holding strength. Swivel ball adapter head provides flexibility for positioning the camera.
Pvc windshield suction performs well in hot climates. Dashboard suction cup diameter 5cm. Car dashboard/windshield rotating mount holder for car DVR GPS Camcorder holder.
Different joints kit to suit most Car Dash Camera, GPS, Action Camera. New 13 different joints kit suitable for most car dash cam, include rexing v1, camcorder dvr on the market, z edge, vantrue, Old Shark, Falcon F170, kdlinks x1, yi, amebay, G1W G1W-H G1W-C G1W-B LS300W GT550S and other hot selling dash cam.
3. woleyi
Woleyi 3 Pack 8CM Adhesive Dashboard Mount Disk Pad with 3M Sticker for TomTom GO Start Garmin GPS Sat Nav Dash Cam Suction Cup Mount
woleyi - 3 packed with 1-year warranty. Sticky adhesive mounting disk support your suction mount or smartphone & camera securely on dashboard. Easy installation: 1 clean the dashboard; 2 remove the protective cover on the base of the disk; 3 Press the disk to the dashboard and leave more than 30 secondds; 4 Attach suction mount on the disc.
Us genuine 3m materials, adhesive mounting disk fits all suction cup mount within 3. 15 inch in diameter for adhering to dashboards. Quickly and conveniently exchange suction mount between windshield and dashboard with the disc.
4. MeetRade
Stick On Double Sided Heavy Duty Adhesive Pad Disk For Lock Sucker Suction Cup Hook Mounting on Dashboard For xiaomi xiaoyi gopro camera GPS Sat Nav Cam 70mm, MeetRade Adhesive Suction Cup Mount
MeetRade - Even in a car, it also waterproof, so can install the camera out side the house. 1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly.
5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Also other mounting used. The adhesive is easily removable and never leave a residue.
Br>high temperature resistance, the adhesive can work on the high temp. 3. Size and use: diameter 70mm2. 76 inch, remember you finger don’t touch the adhesive pad. 3. Clean the surface you need to install.
4. Peel the protector film off, fit for almost kind of suction cup! HOW TO USE: 1. 4. Easy to move: when you need to move it, water resistance, just peel it from the side and slowly pull it up. Never fall again! 2. Material:made of 3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly. Clean the surface of the suction cup by alcohol.
5. pop-tech
Pop-tech 8pcs 3M VHB Double Sided Sticker Heat Resistance Tape for Magnet Cellphone Holder & Windshield Dash Cam, Sticky Adhesive Pad Replacement for Car Dashboard Magnetic Phone Mount Base
pop-tech - 3 the 3m vhb rubber pad is for one-time use. International products have separate terms, and language of product, including fit, are sold from abroad and may differ from local products, age ratings, labeling or instructions.
Note? 1 please do not stick the 3m adhesive pad on the very soft, rough, textured, oily surface or leather surface. Ease of use: tear off without trace!5 do not touch the adhesive with your hands.
Versatility: stickers can be used on flat hard surfaces, lockers, walls, offices, such as home bathroom mirrors, bedposts, refrigerators, dashboards.4
4 it is recommended to wait at least 24 hours to ensure that the sticker has the best adhesion before use. 2 please ensure that the required surface is clean and dry. Features? heat resistance: pop-tech's glue adhesive can resist high temperatures up to 120°! It can maintain the best viscosity under high temperature environment.
6. SoeKoa
Crosstour and Other Dash Cameras, Yi, DuDuBell, apeman, Come with 10+ Different Joints Compatible with TOGUARD, Modohe, SuperEye, Mibao, Dash Cam Suction Cup & Glue Adhesive Mount for Dash Cam
SoeKoa - Sturdy and heat resistant, the windshield under the scorching sun, the suction cup bracket can still maintain a strong suction. What you get - 2 x dash cam mount holders, 10+ different pivot swivel points, 2 x Glue Double Sided Adhesive Tapes.
Adjustable neck with 360 degrees rotating holder, Easy to install and easy to use. Fits most popular car dash cam compatible withtoguard, YI Nightscape, SuperEye, oldshark, Mibao, Crosstour, apeman, Modohe，DuDuBell Dash Cam. Not compatible Garmin Dash Cam. Please attaching to a clean And Smooth Surface To Get Maximum Holding Strength.
7. BBTO
GPS Suction Mount, Sat Nav Dash Cam Holder 3.2 Inch, 8 Piece Disc Dashboard Pad Suction Cup Mounting Disc Adhesive Dashboard Mount Disc Stick on Universal Dash Mount Pad for Suction Cup Phone Mount
BBTO - Installation steps: make sure the target place that is ready to place is clean and dry, then remove the protective cover on the base of the disk, you'd better let it for 24 hours to ensure a strong adhesive grip, press the disk down onto the dashboard and press back and forth to increase tightness, finally place your suction cup onto it firmly.
Compatibility: suction cup mounting disc can be wide applied to smartphone mount, GPS suction mount and more, car camera, please noted the adhesive mounting disk works only with any 80 mm/ 3.2
2 inch or smaller than 80 mm/ 3. 2 inch suction mounting pedestal. Suitable size: dashboard mount disk pad measures 86 mm/ 3. 4 inch in diameter, it can be widely applied to any suction cup accessories that are smaller than 80 mm/ 3. 2 inch, flexible option for car mount sticky replacement; Carefully check the size before buying.
Nice adhesives: made of abs plate and strong adhesive, this disc dashboard pad can attach onto your car and your devices firmly, let your devices don't fly off as you go round corners, easy to use and remove without leaving trace. Practical gifts: you will get 8 pieces adhesive dashboard mount disc in one set, sufficient quantity to meet you daily using and replacement needs, which are also thoughtful gifts for family and friends.
| Brand | BBTO |
| Manufacturer | BBTO |
| Weight | 0.14 kg (0.31 Pounds) |
| Part Number | BBTO-Vehicle Mounts-v1493 |
8. Anteel
6pcs 3.15"80mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam, Anteel Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit
Anteel - Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need. And wait at least 24 hours to use for the better adhesion. It also resists heat and moisture, easy peels off without leaving any sticky residue behind.
Please wait 24 HOURS to use. Press down repeatedly to increase the contact of the adhesive with the substrate. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.6
6pcs clear adhesives replacementanteel offers 6 pcs round clear sticky adhesive padsDiameter: 3. 15"/80mm for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, wireless charger base, ETC, camera mount, dash camera mount holder etc on the market.
You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Very high bond & easy to removethese high-strength, and protects adhesive surfaces against scratches, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time.6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates.
| Brand | Anteel |
| Manufacturer | Anteel |
| Height | 0.1 cm (0.04 Inches) |
| Length | 8 cm (3.15 Inches) |
| Width | 8 cm (3.15 Inches) |
| Part Number | Anteel_6D8A |
9. MyArmor
MyArmor Car Suction Cup for Dash Cam Holder Vehicle Video Recorder on Windshield & DashBoard Mount with 5 Types Adapter 360 Degree Angle View for Driving DVR Camera Camcorder GPS Action Camera
MyArmor - Pvc windshield suction performs well in hot climates. Car dashboard/windshield rotating mount holder for car DVR GPS Camcorder holder. Swivel ball adapter head provides flexibility for positioning the camera.
Different joints kit to suit most Car Dash Camera, GPS, Action Camera. Suitable devices: g1w g1w-h g1w-c g1w-b lS300W GT550S. Attaching to a clean and smooth surface to get maximum holding strength.
| Brand | MyArmor |
| Manufacturer | MyArmor |
| Weight | 0.1 kg (0.22 Pounds) |
| Part Number | 24-50000-061 |
MeetRade - Press down repeatedly to increase the contact of the adhesive with the substrate. 2 pack package include 2 pack of 95mm diameter base disc+2 Pack of 80mm Clear Double sided adhesive+2 Free cleaning Pad. Select a certain place to instal, wait 12 hours after install.
ShipeeKin - Attaching to a clean and smooth surface to get maximum holding strength. Swivel ball adapter head provides flexibility for positioning the camera.
woleyi - 3 packed with 1-year warranty. Sticky adhesive mounting disk support your suction mount or smartphone & camera securely on dashboard. Easy installation: 1 clean the dashboard; 2 remove the protective cover on the base of the disk; 3 Press the disk to the dashboard and leave more than 30 secondds; 4 Attach suction mount on the disc. Us genuine 3m materials, adhesive mounting disk fits all suction cup mount within 3. 15 inch in diameter for adhering to dashboards. Quickly and conveniently exchange suction mount between windshield and dashboard with the disc.
MeetRade - Even in a car, it also waterproof, so can install the camera out side the house. 1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly.
pop-tech - 3 the 3m vhb rubber pad is for one-time use. International products have separate terms, and language of product, including fit, are sold from abroad and may differ from local products, age ratings, labeling or instructions.
SoeKoa - Sturdy and heat resistant, the windshield under the scorching sun, the suction cup bracket can still maintain a strong suction. What you get - 2 x dash cam mount holders, 10+ different pivot swivel points, 2 x Glue Double Sided Adhesive Tapes. Adjustable neck with 360 degrees rotating holder, Easy to install and easy to use. Fits most popular car dash cam compatible withtoguard, YI Nightscape, SuperEye, oldshark, Mibao, Crosstour, apeman, Modohe，DuDuBell Dash Cam. Not compatible Garmin Dash Cam. Please attaching to a clean And Smooth Surface To Get Maximum Holding Strength.
BBTO - Installation steps: make sure the target place that is ready to place is clean and dry, then remove the protective cover on the base of the disk, you'd better let it for 24 hours to ensure a strong adhesive grip, press the disk down onto the dashboard and press back and forth to increase tightness, finally place your suction cup onto it firmly.
Anteel - Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need. And wait at least 24 hours to use for the better adhesion. It also resists heat and moisture, easy peels off without leaving any sticky residue behind.
MyArmor - Pvc windshield suction performs well in hot climates. Car dashboard/windshield rotating mount holder for car DVR GPS Camcorder holder. Swivel ball adapter head provides flexibility for positioning the camera. Different joints kit to suit most Car Dash Camera, GPS, Action Camera. Suitable devices: g1w g1w-h g1w-c g1w-b lS300W GT550S. Attaching to a clean and smooth surface to get maximum holding strength.
